# Copy to .env and fill in your own values.  .env is gitignored — it holds the
# values that identify YOUR line and YOUR network, and must never be committed.
#
#   cp example.env .env
#
# GPON_* are read by the scripts in tools/ (via tools/gpon_env.py).
# The ONT_*/STICK_*/router values are consumed by the copy-paste snippets in
# README.md (shell snippets source this file; RouterOS snippets use <PLACEHOLDERS>).


# ---------------------------------------------------------------------------
# Stick management (telnet) — these are the DPN-100 factory defaults and are
# safe to share; override only if your stick differs.
# ---------------------------------------------------------------------------
GPON_HOST=192.168.100.1
GPON_PORT=23
GPON_USER=root
GPON_PASS=admin


# ---------------------------------------------------------------------------
# Clone target — YOUR ISP-issued ONT's identity.  Read these off the ONT's own
# web UI before you unplug it: Maintenance -> Log, first few lines, has all of
# them in one place (MAC is on the box label).  See README step 2.
# ---------------------------------------------------------------------------
# GPON vendor ID: first 4 chars of the GPON serial (e.g. ALCL for Nokia/Alcatel)
ONT_VENDOR=XXXX
# Full 12-char GPON serial number, e.g. XXXXnnnnnnnn
ONT_SERIAL=XXXXXXXXXXXX
# Equipment ID = the ONT model string (OMCI ME257)
ONT_EQID=X-0000X-X
# Hardware version (OMCI ME256); often printed as "ONT P/N" on the box label
ONT_HWVER=0XX00000XXXX
# Software version (OMCI ME7) — the 14-char prefix of the UI's "Software Version"
ONT_SWVER=0XX00000XXXX00
# The ONT's own MAC.  Only matters if the stick runs in router mode; cloned for
# faithfulness.  In bridge mode your router's MAC is what the ISP's DHCP sees.
ONT_MAC=00:00:00:00:00:00


# ---------------------------------------------------------------------------
# The stick's OWN factory values — record these BEFORE overwriting them, they
# are your revert path (README step 9).  Device-unique.
# ---------------------------------------------------------------------------
STICK_VENDOR=DLNK
STICK_SERIAL=DLNKxxxxxxxx
STICK_EQID=DPN-100
STICK_HWVER=1.0.0
STICK_MAC=00:00:00:00:00:00
# Factory PLOAM password, from `misc pon_passwd get` — usually not needed
STICK_PLOAM=xxxxxxxxxx


# ---------------------------------------------------------------------------
# Your network (used by README's router-side steps)
# ---------------------------------------------------------------------------
# How you reach the MikroTik itself
ROUTER_ADDR=192.0.2.1
# The single host allowed to reach the stick's telnet management
ADMIN_HOST=192.0.2.2
# Address the router puts on sfp1 to talk to the stick (same /24 as GPON_HOST)
STICK_MGMT_ADDR=192.168.100.2/24
# The ISP's WAN VLAN on the Ethernet side of the stick — VERIFY THIS YOURSELF
WAN_VLAN=4